Blackstone PRO Serie Manual Del Propietário página 7

Model: 2165
Use two (2) M6x12 screws to attach the right side of the cart
STEP 03
base to the right leg assembly.
ensure that the grate panel holes are oriented to the inside
of the cart.
With the help of another person, set the cart on its feet.
STEP 05
Use four (4) M6x12 screws to loosely attach the grate panel to the
left and right leg assemblies. do NoT fully tighten the screws at
this time.
Use four (4) M6x12 screws to attach the front logo panel to
STEP 07
either side of the griddle body.
BLACKSTONEPRODUCTS.COM/SUPPORT
Grate panel
holes
ASSEMBLY GUIDE
Use two (2) M6x12 screws to attach the left side of the cart
STEP 04
base to the left leg assembly.
ensure that the grate panel holes are oriented to the inside
of the cart.
Grate panel holes
With the help of another person, place the griddle body on
STEP 06
the cart.
Use four (4) M6x12 screws to secure the griddle body to the
STEP 08
left and right leg assemblies.
ensure the griddle legs are standing level on ground and tighten the
four (4) M6x12 screws on the grate panel.
| OWNER'S MANUAL
07