Observe the plan for placing cutlery
Fig.
10a
into the cutlery basket. See table below
for possible part designations.
1
Soup spoons
3
Knives
5
Dessert spoons
Serving forks
7
The cutlery tray can be varied and
Fig.
10b
adapted according to your needs.
I.
standard position, both halves
inclined
II. left side flat, right half inclined
III. both halves flat, right half increased
IV. left flat, right open, right half
moved over the left half
V. left flat, right open, right half
removed
IM_KDW 60111 A2 FS_170802_V08_HR.indb 25
Operation
Washing dishes
Fig.
2
Forks
4
Teaspoons
6
Serving spoons
Dipper
8
Note:
• We recommend to use the half load
• Select the extra dry
• The functions half load and extra dry
• These modes can only be used with the
Consider following steps to start the
11
washing process:
1. Prepare dishwasher.
2. Load the dishwasher basket.
3. Add detergent or rinse aid.
4. Make sure the water-tap/water
supply is open, the appliance is
connected to the mains and the door
is closed correctly.
5. Push Ein/Aus button to turn on the
dishwasher and choose your program,
referring to chapter Choosing
Program.
If the dishwasher is not completely
loaded, then you can additionally
select the Half load mode. This mode
allows you to save both water and
electricity when using the bottom
and top basket of your dishwasher.
Press the half load button
half load indicator lights up.
function if the dishes are slightly soiled.
function if you
want the dishes to be extra dry.
cannot be selected at once.
program setting Intensive
, ECO, Glass
and 90 min
English
and the
, Normal
.
25
2/8/17 12:02 pm