Eneo VKC-1334/W3 Instrucciones De Instalación Y Manejo página 31

• Main Menu - WDR
Press the MENU button to access the WDR mode.
Move up and down
Using the Tele & Wide
button
1. Set WDR MODE to the desired mode using the LEFT or RIGHT button
2. Set WDR LEVEL to the desired mode using the LEFT or RIGHT button
• Adjust the brightness level in WDR mode. (Parameter: 0 ~ 15)
3. Set BACK LIGHT to ON/OFF using the LEFT or RIGHT button
4. Set BLC LEVEL to the desired mode using the LEFT or RIGHT button
• 0 ~ 15 Ranged and adjust the brightness in BLC Gain.
5. INITIAL
• Initializing WDR MODE
6. EXIT
• Return to MAIN MENU
WDR
WDR MODE
WDR LEVEL
BACK LIGHT
BLC LEVEL
INITIAL
EXIT
31
OFF
4
OFF
10
ON
Can be changed
using the NEAR &
FAR button