Program Play; Direct Skip Play; Play Time Search [Cd] - Kenwood KDV-S240P Manual De Instrucciones

CD/MP3 features

Program Play

Plays the selected songs only in order.
1
Stop playback
Press the [7] button.
2
Enter the Program mode
Press the [PROG] button.
Switches "PLAY MODE" displayed at the bottom
of the screen to "PROGRAM PO" during MP3
playback.
3
Select the song you want to play
Press the [2]/[5]/[3]/[∞] (during MP3
playback only) or [0] – [9] button.
Specifies the file containing the song you want
to play.
4
Finalize the song you want to play
Press the [ENTER] button.
The song selected in Step 3 is registered as
Program number 1.
5
Repeat Steps 3 and 4 to register all the songs
you want to program play.
For MP3, if you have finished programming, press
the [7] button to exit the Program mode.
6
Start Program Play
Press the [38] button.
Plays the registered songs in order.
Canceling Program Play for CD
Press the [7], [PROG] and [ENTER] buttons in
order.
Canceling Program Play for MP3
Press the [7] and [PROG] buttons in order.
16
|
English

Direct Skip Play

Directly calls the song you want to play.
1
Enter the Track, File, or Folder number you
want to play
Press the [0] – [9] button.
2
Play
Press the [ENTER] button.
• If you do not perform the operation of Step 2 for
about 5 seconds, the song entered in Step 1 is
automatically searched for.

Play Time Search [CD]

Enter the play time to start from where you want.
1
Enter the Play Time Search mode
Press the [SEARCH] button.
2
Enter the play time where you want to start
Press the [0] – [9] button.
For example
5:07 ➪ [0], [5], [0], [7]
Starts playing from the time you entered.