Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
Aditional functions
Spin
When required, the spin speed can be adjusted by pressing this button in the following steps: 600-800-
1000-1200
Programmed start
1. Select a programme
2.Press the Programmed Start button to choose the time from 0-24h.
3.Press [Start/Pause] to start the operation.
Cancel the function:
Press the [Programmed Start] button before starting the programme. If the programme has already
started,
you need to turn off the unit to restart.
Prewash
Additional washing function before the main wash cycle starts to increase the washing performance.
Note: Detergent must be added to compartment I.
Extra Rinse
Laundry will undergo extra rinse after selecting this function.
Drum clean
Once the washing machine has reached the set running period (the running cycle is 25 times), the indi-
cator light will flash at the end of the last programme, reminding the user to run the programme;
Unlock mode:
1. Press and hold the button for 3 seconds, and the drum cleaning reminder will be cancelled; the wash
cycles will be re-counted for another 25 cycles.
2. The counted wash cycles will be counted again at the end of the drum cleaning programme.
Temperature
When required, the washing temperature can be adjusted by pressing the temperature button in the
following steps:
0°C - 40°C - 40°C - 60°C - 90°C.
Note:
Usage counter
1. Switch off the unit for 10s and switch it on again.
2. Switch on the unit and, for 10 seconds, press "Programmed start" and "Antimicrobic Technology" on
the control panel simultaneously and continuously for about 5 seconds until the device display shows
digits: the value can indicate the usage time of the equipment.
3. Repeat step 1 again and you can resume normal operation.
37
infiniton.es
Publicidad
