Greencut CLA400X Manual De Instrucciones página 64

64
PERIODIC MAINTENANCE
COMPONENT/
EVERY USE
TASK
Air Cleaner
Check
Spark Plug
Combustion
Chamber
Exhaust
Check/tighten
Fasteners
as necessary
Fuel Tank
Fuel Line
Fuel Strainer
Grease Pinion
CHECKING, CLEANING OR REPLACING THE AIR FILTER
ATTENTION: Operating the machine without a functional air filter may cause severe engine
damage and will void any warranty.
• A dirty or oil saturated air filter will restrict air flow, which can reduce performance and be
mistaken as fuel system problems. Check the condition of the air filter before adjusting engine
idle speed, where applicable.
• If the air filter is damaged (torn, broken, disintegrating), replace it.
The air filter is used to prevent dirt and other particles from possibly entering the engine and causing internal damage
to it. The engine breather may be connected to the air intake assembly – this may lead to a build-up of oil in the air
filter over extended use and is normal. The air filter requires regular maintenance as per the maintenance schedule.
AIR FILTER INSPECT ON AND CLEANING
Inspect the air filter for dirtiness and debris, damage etc. Clean or replace the filter element as necessary. To clean air filters:
• For foam filters, wash the filter in warm water and mild detergent, then rinse and allow to dry.
• For paper filters, use compressed air to blow particles from it. The air should be blown from the engine side of the filter.
• Clean all other air filter assembly components using water and mild detergent, then dry them.
• For foam filters, place a few drops of clean engine oil on the filter then squeeze it a few times to spread the oil through
the filter material and remove any excess oil.
FIRST MONTH EVERY 3
OR 20 HOURS MONTHS OR
USE 50 HOURS USE
Clean and replace as necessary
Check
Clean and replace as necessary
Clean / lubricate
as necessary
EVERY 6
MONTHS OR
100 HOURS USE
Replace
Replace as necessary
EVERY YEAR
OR 300 HOURS
USE
De-coke as
necessary
De-coke as
necessary
Flush and clean