Publicidad
Idiomas disponibles
Idiomas disponibles
AIR FILTER REMOVAL/INSTALLATION
To remove the air filter:
1.
Place the machine vertically on a flat, level surface.
2.
Unscrew the air filter cover screw (B) (turn it counterclockwise)
until the air filter cover A) can be removed.
3.
Pull the air filter element (C) out of the air inlet assembly.
To install the air filter:
1.
Insert the air filter element into the air inlet assembly.
2.
Reinstall the air filter cover and secure it with the air filter cover
screw (turn clockwise).
CHECKING, CLEANING OR REPLACING THE FUEL STRAINER
ATTENTION: A dirty or blocked fuel filter will restrict fuel flow, which can reduce performance and
be mistaken for fuel system problems. Check the condition of the fuel filter before adjusting the
engine idle speed, as appropriate.
•
If the fuel strainer is no longer serviceable, replace it.
The fuel strainer is used to prevent dirt and other particles from possibly entering the fuel system and engine and
causing internal damage to it. The fuel strainer requires regular maintenance as per the maintenance schedule.
FUEL STRAINER INSPECTION AND CLEANING
Inspect the fuel strainer for dirtiness and debris etc. Clean or replace the strainer as necessary. To clean fuel strainers:
•
Wash the strainer in clean solvent.
•
If possible, use compressed air to assist in removing any blockages. Blow air into the strainer from where it
connects to the tube.
FUEL STRAINER REMOVAL/INSTALLATION
To remove the fuel strainer:
1.
Place the machine in a horizontal position with the fuel filler cap facing up on a flat and level su face.
2.
Remove the fuel tank cap (rotate left) and empty the fuel tank
(A).
3.
Use a hooked object to capture he fuel intake tube (B) inside
the fuel tank and gently pull it from the tank.
4.
The fuel strainer (C) is installed on the end of the tube – to
remove it, twist and pull it from the end of the tube.
To install the fuel strainer:
1.
Firmly push the fuel strainer onto the fuel intake tube.
2.
Place the tube back inside the fuel tank – it should rest along
the bottom of the fuel tank.
B
C
65
A
EN
B
C
A
Publicidad
