Publicidad
Idiomas disponibles
Idiomas disponibles
SWITCH (see Fig. 1A), and depress the forward/reverse control button (see Fig. 1B),
toward left side of the tool. To select reverse, depress the forward/reverse control
button, toward right side of the tool. The center position of the control button locks the
tool in the off position. When change the position of the control button, making sure
the trigger is released.
NOTE: The first time the tool is run after changing the direction of rotation, you may
hear a click on start up. This is normal and does not indicate a problem.
BUILT-IN LED LIGHT
A built-in LED light can illuminate the work area and improve vision when
drilling/driving in areas with insufficient light.
ELECTRIC BRAKE
The variable speed switch is equipped with a circuit design electric of brake function.
The tool will consistently operate to quickly stop rotating after the switch release.
SPEED MODE SETTING
Press the button to select the speed in Low (1)
or Middle (2) or High (3) (selected one will
be lightened on)
Low： 0-900 rpm
Middle : 0-1,200 rpm
High： 0-1,600 rpm
Remark : If the red LED bright, it means there
is the error or start up protection.
BATTERY POWER INDICATOR
Trigger the tool and Battery Indicator to show the
battery pack's remaining capacity
1.
One light ON: 30% remaining capacity.
2.
Two lights ON: 60% remaining capacity.
3.
All lights ON: 100% remaining capacity.
1English1
A
Fig. 1
English
Error
High
Middle
-8
B
Low
Setting
button
Publicidad
