Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
Aditional functions
Programmed start
1. Select a programme
2.Press the Programmed Start button to choose the time from 0-24h.
3.Press [Start/Pause] to start the operation.
Cancel the function:
Press the [Programmed Start] button before starting the programme. If the programme has already
started,
you need to turn off the unit to restart.
Prewash
Additional wash function before the main wash cycle starts to increase the washing performance.
washing performance.
Note: Detergent must be added to compartment I.
Extra Rinse
Laundry will undergo extra rinse after selecting this function.
Spin
Press this button to change the spin speed.
Temperature
When necessary, the washing temperature can be adjusted by pressing the temperature button in the
following steps:
Cold - 20°C - 30°C - 40°C - 60°C - 90°C.
My Cycle
Memorises programmes that are frequently used.
Press the Spin button for 3 seconds to start the programme.
The default preset programme is Cotton.
Child Lock
To prevent misuse by children.
Press [Temp.] and [Spin] simultaneously for 3 sec.
until a beep sounds. The child lock indicator will light up.
CAUTION:
When the child lock is activated, the display will alternately show "CL" and the remaining time.
When any other button is pressed, the Child Lock indicator will flash for 3 sec.
The child lock can only be deactivated by pressing both [Temp] and [Centrifuge] buttons simultaneous-
ly.
Deactivate the child lock before selecting a new programme.
Muting the beeps
1. Select a programme
2. Press the [Spin] button for 3 seconds, to temporarily mute the beeps.
To reactivate the sound, press the button again for 3 seconds. The setting will be maintained until the
next reset.
CAUTION:
After muting this function, the sounds will no longer be activated.
44
infiniton.es
Publicidad
