Receive A Call - Kenwood KDC-X302 Manual De Instrucciones

BLUETOOTH®
Auto Pairing
When you connect iPhone/iPod touch/Android
device to the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned
on.
– [AUTO PAIRING] is set to [ON]. ( 21)
– KENWOOD MUSIC PLAY application is installed on the
Android device ( 8) and [BROWSE MODE] is selected
( 9).
18
ENGLISH
BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:
• / /
illuminates in green color and flashes.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 19)
During a call:
•
/ /
illuminates according to the settings made for [DISPLAY] ( 28) and ZONE 2 illuminates in
green color.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
/ /
/ /
On the faceplate
Press or the volume knob
or one of the number buttons
(1 to 6).
Press .
Press .
: ZONE 2
: ZONE 1
On the remote control
Press .
Press .
Press .