Bluetooth - Mobile Phone; Receive A Call - Kenwood DPX794BH Manual De Instrucciones

Bluetooth®
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to
[ON]. (Page 26)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone

Receive a call

When there is an incoming call:
• [KEY 1] zone and [KEY 2] zone illuminate in green color and flash.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 24)
During a call:
• [LCD DISPLAY] zone illuminates according to the settings made for [COLOR
SELECT] (page 33) while [KEY 1] zone and [KEY 2] zone illuminate in green
color.
• If you turn off the unit, Bluetooth is disconnected.
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
volume knob or
one of the number
buttons (1 to 6).
Reject a call
Press
End a call
Press
While talking on the first incoming call...
Answer another Press
incoming call and hold
the current call
Reject another incoming
Press
call
While having two active calls...
End current call and
Press
activate held call
Swap between the Press
current call and held call
On the remote control
or the Press .
Press .
.
Press .
.
. Press .
Press .
.
Press .
.
. Press .
ENGLISH
23