Data Rating Label; Service Information - Thermador T24UR820DS Manual De Uso Y Cuidado

Food products and beverages in the
unit are too cold.
The interior light (LED) does not
work.
There are unpleasant odors coming
from the appliance.
The divider between the upper and
lower drawers feels warm.
Display indicates "HI" and the alarm
is sounding.

Data Rating Label

The data rating label shows the model and serial number of your appliance. It is located at the right side of the bottom
compartment.

Service Information

For handy reference, copy the information in the form below from the data rating plate located at the right side of the
bottom compartment. Keep your invoice for Warranty validation.
Model Number_____________________________________
Serial Number_____________________________________
Date of Purchase___________________________________
Dealer's Name_____________________________________
Dealer's Phone Number______________________________
Service Center's Name______________________________
Service Center's Phone Number_______________________
Temperature has been set too low.
Product placed too close to ventilation
holes.
The unit is set to Sabbath mode.
Strong smelling food is not sealed.
Normal operation, as part of the
moisture control system for the exterior
of the unit.
Temperature is too warm inside the
refrigerator because the door has been
left open for an excessive amount of
time.
Increase the temperature. See "Setting
the temperature".
Make sure the unit is not in "Quick
Chill" mode.
Rearrange the bottles, so that nothing
obstructs the interior ventilation holes.
Disengage Sabbath mode. See
"Special Functions" section.
Clean the appliance. Seal strong
smelling food (See chapter "Odors").
No action required.
Press the alarm button once to
temporarily deactivate the ALARM
sound and LED indicator.
Close the door, and allow the unit to
cool.
13