Description
The RM Series of rotary mowers are designed as self-powered units to be towed behind a suitable, ATV, UTV, 4X4, compact tractor or lawn-
mower.
Designed for general paddock topping and maintenance, with the ability to tackle light reeds and rushes if required, the RM range is perfect for
liveries, estates and farms alike.
The RM120 has a 1.2m (4') cut, and is available with a Honda GXV390 13hp, or optionally an electric start GXV390 13hp. The RM150 has a 1.5m
(5') cut and is available with a Honda GXV390 13hp, or optionally an electric start GXV390 13hp.
These machines should however only be used to perform tasks for which they were designed - use of the machine for any other function may be
both dangerous to persons, and potentially damaging to components. Use of the machine beyond the stated usage may invalidate any applicable
warranty, as well as being in breach of applicable safety regulations.
Noise Levels
The sound of this machine, as measured at the typical operator location under normal operating conditions, is 91db. If being towed by an open-
cab vehicle, it is essential that ear defenders or a suitable helmet is worn at all times. If being towed behind an closed-cab UTV, 4x4 or similar,
then the cab should remain closed to reduce noise.
EAR DEFENDERS OR EQUIVALENT HEARING PROTECTION DEVICES MUST BE WORN AT ALL
Technical Information
Component
Identification
1)
Engine
2)
Rear Deflector
3)
Belt Guards
4)
Drawbar
5)
Throttle
6)
Height Adjuster
7)
Drawbar Offset
8)
Hitch
NOTE: RM Models are fitted with a combined throttle / choke / stop cable. This provides the
emergency stop function should it be required.
COMBINED THROTTLE / CHOKE / STOP CONTROL MUST BE WITHIN REACH OF THE OPERATOR DURING
ENSURE CONTROL EQUIPMENT IS SECURELY ATTACHED TO THE TOWING VEHICLE BEFORE USE
CHECK OPERATION OF EMERGENCY STOP CONTROL BEFORE COMMENCING WORK
TIMES WHEN OPERATING THIS EQUIPMENT!
1
\
2
\
6
5
\
\
NORMAL OPERATION!
3
3
\
7
4
\
\
English
8
\