Klarstein ICEFESTIVAL BULLET Manual Del Usuario página 17

OPERATING ELEMENTS
COMMISSIONING AND OPERATION
1. Adding water by hand: Open the lid, take out the ice basket and fill the water
tank with water.
Note: Make sure the water level in the water tank is not over the bottom of the ice
bucket.
2. Connect the device to a power supply.
3. Press the ON button to turn on the ice cube maker. The ice cube maker starts
ON button: Press to turn on the device.
ADD WATER light: The light turns on with a long beep,
signalling that you need to add water. Then restart
the unit.
ICE light: The light turns on when the appliance is
making ice cubes.
ICE FULL light: The light turns on when the ice bucket
is full.
OFF button: Press this button to turn off the device.
EN
17