N-Gear THE FLASH JUKE 12 Manual De Usuario página 6

Tips:
Protect your hearing from damage and avoid affecting others,
Recommends that to do not use this product at high volume for long time
In order to bring better using experience, please keep the accessories of this product.
Common issues and solution:
phenomenon
The plug is not plugged in properly or
No Power
Source media/input connection selected
No sounds
Audio media/input connection selected
Microphone Volume is off or too low
Microphone
Poor audio signal or volume too large
Distortion of
sound
Squeal from The microphone volume is too loud or too
Microphone
reason
Power switch is not turned on
Built-in Battery runs out
the power cable is defective
Power outlet is not electric field
Other reason
Volume is turn off or mute mode
incorrectly
audio file
Other reason
Poor contact
Other reason
Battery running low
close to the speakers
For questions or service please contact N-Gear
www.n-gear.eu
solution
Turn on the power switch
Charge the product via adapter or power cable
Reinsert or replace the power cable
Replace the power outlet
contact after-sales dept.
Adjust the volume or turn off Mute mode
Select the correct audio media/input
connection
Reinsert media with supported format
Contact after-sales service
Contact after-sales service
Reinsert replace the microphone jack
Contact after-sales service
Adjust audio files /signals or reduce volume
Full charged before using
Adjust microphone volume and keep properly
distance from speakers
EN