Fnirsi 2C23T Manual página 42

⑩Channel 1 waveform:When operating the
the movement waveform, the interface appears
movement, and use the up and down buttons on the direction keys to move
channel 1 waveform.
⑪Channel 2 waveform:When operating the
the movement waveform, the interface appears
movement, and use the up and down buttons on the direction keys to move
channel 2 waveform.
⑫Left and right cursors:
resent waveform movement, use direction keys left and right buttons to move
the cursor.
⑬Parameter measurement
press
parameters to be measured, as
shown in
press , all measurements will
not be made, and the measured
parameters will not be displayed in
the interface.
1.3 Oscilloscope - waveform screenshot saving
①Save screenshot:Short press
and a pop-up prompt will pop up
Saving...
the right image; Expected to pop up
Saved
2 seconds. At this point, the
waveform interface
images in BMP format, and the
image name will be named "img _
number". It can be viewed and
deleted by the machine itself, or
inserted into TYPEC to connect to
the computer for viewing.
Short press
display:Short
to pop up and set the
the figure. Long
saving, as shown in
save successfully in
has stored
, short press
, short press
, the interface appears
35
to set
represent waveform
to set
represent waveform
rep-