Fnirsi 2C23T Manual página 48

⑥Gear:The four buttons used to indicate the manual gear represent which gear
to switch to (switch back to automatic short press
from left to right in sequence:
Voltage/ Diode Continuity test/
Resistance
⑦Power indicator.
3.3 Introduction to the Digital Multimeter Probe Interface
High current measurement:red test
pen connected to 10A, black test pen
connected to COM, automatically
identifying AC and DC currents.
If the measured current is greater than 10A, it will burn out the fuse.
lease preliminarily evaluate the current before measuring.
Low current measurement:red test
pen connected to mA, black test pen
connected to COM, automatically
identifying AC and DC currents.
If the measured current is greater than 1A, it will burn the fuse.
Before measuring, please preliminarily evaluate the current. If unsure,
please use a high current gear for measurement first.
capacitance
41
Temperature/
Live Line detection
Notice
Notice
), corresponding
High current/
low current