Klarstein WONDERBEAM Manual Del Usuario página 23

Setting the weekly mode
Press and hold the timer button for 6 seconds to enter week mode. "P1" flashes
in the digital display. Touch the plus or minus buttons to go from P1 to P7, i.e.
from Monday to Sunday. Press the timer button to confirm the day of the week
and jump to the hour setting. The digital display will flash at 00. Press the plus
or minus buttons to cycle through the hour setting from 00 to 23, then press
the timer button to confirm the hour setting and skip to the minute setting, the
digital display will flash at 00. Press the plus or minus buttons to scroll through the
minute setting from 00 to 59. Then press the timer button to confirm the minutes
setting and jump to the following setting of the day of the week, loop.
If there is no action for 10 seconds, the weekly mode setting is considered
successful. When you enter the weekly mode setting again, the data of the
previous setting is displayed.
The weekly program is as follows:
from Monday to Friday
• 20 °C from 00:00 a.m. to 06:59 a.m.
• 25 °C from 07:00 a.m. to 07:59 a.m.
• no heating from 08:00 a.m. to 2:59 p.m.
• 25°C from 3:00 p.m. to 9:59 p.m
• 20 °C from 10:00 p.m. to 11:59 p.m.
on Saturday and Sunday
• 20 °C from 00:00 a.m. to 06:59 a.m.
• 25 °C from 07:00 a.m. to 10:59 p.m.
• 20 °C from 11:00 p.m. to 11:59 p.m.
EN
23