2 Proper use of the refrigerator
2.1 Placement
10mm
10mm
10mm
897mm
130°
1600mm
The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor.
Before use, remove all packing materials, including bottom cushions,
foam pads and tapes inside of the refrigerator;
tear off the protective film on the doors and the refrigerator body.
Keep away from heat and avoid direct sunlight. Do not
place the freezer in moist or watery places to prevent rust
or reduction of insulating effect.
Do not spray or wash the refrigerator; do not put the refrigerator in
moist places easy to be splashed with water so as not to affect the
electrical insulation properties of the refrigerator.
The refrigerator is placed in a well-ventilated indoor place;
the ground shall be flat, and sturdy (rotate left or right to
adjust the wheel for leveling if unstable).
This refrigerator needs to be installed independently and cannot be used
as a built-in. Otherwise, it will cause problems such as failure to install into
the cabinet, the performance and life of the product are reduced. And the
manufacturer does not provide basic product warranty.
The top space of the refrigerator shall be greater than 10cm, and the
refrigerator should be placed against a wall with a free distance more than
10cm to facilitate heat dissipation.
Spare enough space for convenient opening of the doors and drawers.