INSTRUCTIONS OF USE
• The scale works with 1 rechargeable battery included.
• When the scale is "on" and the digits "0.0" showed on the display, you can select the
weight you want by pressing the button "UNID" placed at the bottom of the scale: kg
(kilograms) - lb (pounds).
GETTING WEIGHED
• Get straight on the scale by putting first one foot slowly on the platform and then the
other. The display will show the result and will flash twice before getting fixed.
• After weighing, the scale will switch off automatically.
SET PERSONAL DATA
• The scale has the option to weigh and get fat percentage, body water, bone density, muscle
mass. It also shows the recommended calories, corporal mass index, upon introduction
and memorization of the following data: age, sex and height. The scale has data capacity
of 10 people.
• To insert the data in the memory, follow the next steps.
• Switch on the scale and press "SET". The display will show corresponding to one of the
10 memories of the scale between P0 and P9. Immediately and using buttons (5) look
for "P0" to enter data for a person and press "SET" to set. It appears intermittently the
symbol that correspond with the male or female, select with the arrows (5) and push
"SET" to fix it. Next insert the age with the same buttons (5) and press "SET" to fix it.
• Use the same button to select and press "SET" to fix the height "cm".
• The data of the selected number person is memorized. Wait for the digits "0.0" appear on
the screen.
• Repeat all the process with all the people that are going to use the scale.
11
Mod. 538