GE PSA1200 Instrucciones De Instalación página 20

Installation Instructions
ADAPTING BLOWER
FOR RECIRCULATION
NOTE:The exhaust adaptor with damper is not
needed for recirculating models. You may want
to save them for possible future use.
[_3 Remove and save screws that hold blower plate
to the oven.
i_ _
BlowerPlateScrews
_-_-- Back ofOven
[_3 Slide the blower plate from under its retaining
flange and lift it off. Remove and save screw that
holds the blower motor to oven.
Retaining __
Flange _ _ "___..... _,_
_ -_ __,_7 _ Blower P late
Screw
[_3 Carefully pull out the blower unit. The wires
will extend far enough to allow you to adjust
the blower unit.
[_ Roll the blower unit 90 ° so that fun blade openings
are facing toward the front of the oven.
Roll
/ Jl IJl
i
NOTE: Make sure wires remain routed in the grooves
of the motor frame.
2O