Descargar Imprimir esta página

STAMOS TRUE COLOUR GLASS X-100B Manual De Instrucciones página 25

Casco de soldadura true color

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 100
microfiber cloth for this purpose. Always keep the sensors and photosensitive
elements clean.
i)
The front surface of the unit should be cleaned regularly.
j)
Welding in an overhead position when using the unit is forbidden.
k)
Do not use the unit in the vicinity of corrosive liquids or explosive materials.
Use extreme caution.
l)
Properly adjust the self-shielding filter and the fasteners (elastic bands) before
operating the unit.
m) Do not touch the device with wet or damp hands.
n)
Do not immerse the unit in water.
o)
Do not use solvents to clean the filter or the whole unit.
Remember!
2.3. Safe use of the product
a)
Keep unused appliance out of the reach of children and anyone unfamiliar with
the appliance or this manual. Products are dangerous when used by
inexperienced users.
b)
Keep the product in good working order. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
return the device for repair before use.
c)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
d)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
e)
Clean the device regularly to prevent permanent dirt build-up.
f)
Do not tamper with the device to alter its performance or design.
g)
Keep the unit away from sources of fire and heat.
h)
If, after the electric arc has been struck, the sensors on the unit do not
automatically cause a blackout, immediately stop working with the unit and
re-read the operating instructions.
i)
The materials used in the construction of the unit may cause an allergic
reaction in the user.
j)
The unit is not suitable for use in laser welding / cutting and oxy-acetylene
welding / oxy-acetylene cutting.
k)
Opening or tampering with the self-shielding filters is forbidden.
l)
Making changes/modifications to the unit that are not described in the
operating instructions is forbidden. Changes/modifications to the unit that do
Keep children and other bystanders safe while operating the
appliance.
EN

Publicidad

loading