Publicidad
STEP 12
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Be sure the notch in the back
panel is positioned for access to
safety bracket (13a).
ameriwoodhome.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
8
AND MUST BE INSTALLED PROPERLY.
(x51)
#A21110
M
B
H
Flush the bottom edge of the back panel
with the bottom edge of the bottom (H).
19
8
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
Publicidad
