Aiwa AV-X120 Manual De Instrucciones página 12

PRESETTING STATIONS
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 Press the TUNER button to select the band, and
mess
the
UPA
or DOWNV button to select a
station. Direct tuning is also available.
2 Press the SET button to store the station.
A station is assigned a preset number, beginning from
consecutive order for each band.
1 in
Preset number
3
Repeat steps 1 and 2.
No more stations will be stored if a total of 32 stations have
already been stored for all the bands.
m
PRESET NUMBER TUNING
1
2
Press the TUNER button to select a band.
Press the numbered buttons to select a preset
number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7, press O and 7.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the SET button, and prees the SET button again within four
seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
When
using the remote control
Press the TUNER BAND button to select a band, then press the
numbered buttons to select a preset number.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
1 I ENGL/SH