SETTING THE SLEEP TIMER
1
2
The unit can be automatically turned off at a specified time.
Use the remote control.
1 Press the SLEEP button.
2 Press the UP>
or DOWN<
button within four
seconds
to specify the time until the power is
turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
Specifi:d
time
To
check the time remaining until the power is turned
off
Press the SLEEP button once. The remaining time is displayed
for four seconds.
CARE AND MAINTENANCE
-
Occasional
care and maintenance
of the unit is needed to
optimize the performance of your unit.
To clean the cabinet
Use a soft dry cloth.
If the surfaces are extremely
dirty, use a soft cloth lightly
moistened
with mild detergent
solution.
Dc) not use strong
solvents, such as alcohol, benzine or thinner as these could
damage the finish of the unit.
To cancel the sleep timer
Press the SLEEP button twice so that "SLEEP" on the display
disappears.
ENGLISH
14