BYK mac i Serie Instrucciones Resumidas página 7

BYK-Gardner GmbH
3 Main Menu
The main menu provides the following options.
Setup (*)
Change measurement parameters, instru-
ment settings, perform and verify calibra-
tion. Details see:
•
Measurement Parameters
• Instrument Calibration
Data view
View data stored in instrument memory:
• Select Test serie or Standard.
• In Test serie select Absolute, Differ-
ence or the appropiate organizer.
Choose appropriate test series and
press button operate or wheel mode
to view the data of the first reading.
Press button operate to switch to the
next reading.
• In Standard select appropriate stand-
ard from the menu.
(*) If a foreign language has been activated accidently, find the language settings by fol-
lowing the * symbol in the menus.
269 026 191 - 2301
Measure
Enter measurement menu to select meas-
urement mode. Details see:
•
Difference Measurement
[} 8]
• Absolute Measurement
[} 9]
•
Continue Test Series
• Organizer Measurement
Delete
Delete data from instrument memory:
• Last Measurement: The number of
performed measurements of a check
zone is reduced by one.
• Check zone: Delete a complete check
zone.
• Test series: Delete all or individual
series taken in Difference, Absolute
or Organizer mode.
• Standard: Delete an existing stand-
ard from the instrument.
BYK-mac i Family
[} 10]
[} 11]
[} 11]
[} 12]
7