voestalpine bohler welding WF NX 330 Classic Manual De Instrucciones página 60

ACCESSORIES
5.2.3 Circuit resistance calibration (set up 705)
705.
EN
705.
10.0
6. ACCESSORIES
Kit RC (WF... Steeldrive)
73.11.015
Small wire feed wheels kit
73.10.074
7. MAINTENANCE
Routine maintenance must be carried out on the system according to the manufacturer's instructions. When the
equipment is working, all the access and operating doors and covers must be closed and locked. The system must
not be modified in any way. Prevent conductive dust from accumulating near the louvers and over them.
Any maintenance operation must be performed by qualified personnel only. The repair or replacement of any parts
in the system by unauthorised personnel will invalidate the product warranty. The repair or replacement of any parts
in the system must be carried out only by qualified personnel.
Parameter selection
MIG/MAG
Calibration
screen.
Push-Pull kit
73.11.012
56
0
Large wire feed wheels kit
73.10.073
MIG/MAG
MIG/MAG