Kicker 19434227 Instrucciones página 6

Wipe the area with one of the supplied alcohol wipes and let it air dry. Install the supplied adhesive-
backed wire retainer about two inches right of the centerline of the tailgate.
Feed the speaker wires through the rubber grommet.
Gather all the wires together without and secure them with wire ties. The center wire tie pictured should
be placed through the adhesive backed wire retainer and then around the wires.
Note: Trim wire tie ends. Make certain there are no loose ends of wire ties or wires
that can contact the plastic housing or the tailgate in order to prevent buzzes or
rattles from vibration.
2 inches
6