AKASO BRAVE 7 Manual Del Usuario página 12

EN
3. Video Encode
H.264 / H.265 (Default setting: H.264)
Video encode is basically a process of converting a given video input into a digital
format that is compatible with most types of Web players and mobile devices.
4. Loop Recording Time
Off / 3 Min / 5 Min / 6 Min (Default setting: Off)
Set the time of videos recorded in Loop Recording mode. For example, if the "Loop
Recording time" is set to "3 Min", then the camera will create video clips of 3 minutes
in length, and a 3-minute clip will be deleted when the camera needs more memory.
5. Slow Motion
1080P90 / 1080P60 / 720P120 / 720P60 (Default setting: 1080P90)
Configure the resolution of the video captured in Slow Motion Video mode.
6. Time Lapse Interval
0.2 Sec / 0.3 Sec / 0.5 Sec / 1 Sec / 2 Sec / 5 Sec / 10 Sec / 30 Sec / 1 Min (Default
setting: 0.5 Sec)
Set the frequency for capturing video frames in Time Lapse Video mode.
7. Time Lapse Duration
Off / 5 Min / 10 Min / 15 Min / 20 Min / 30 Min / 60 Min (Default setting: Off)
Choose how long your camera captures videos before automatically stopping.
8. Still Photo
4K30
The camera allows you to snap stills during video recording. Only 4K30 is available in
Still Photo mode.
9. Still Photo Time
3 Sec / 5 Sec / 10 Sec / 30 Sec (Default setting: 3 Sec)
Set the interval at which the camera takes photos during video recording.
10. Audio Record
On / Off (Default setting: On)
Choose to turn Audio Record on or off. With Audio Record disabled, the camera
captures videos without sound.
10 09