AKASO BRAVE 7 Manual Del Usuario página 24

EN EN
Remote Control
There are two remote controllers available for this camera. Ensure that you have
received the correct remote control. The two remote controllers differ in terms of
their appearance and operation, so it is crucial to carefully read the corresponding
instructions before using them.
Tip: There is a Reset hole on the right side of the remote's USB port. If your remote
malfunctions or if you need to pair it with another AKASO action camera, simply use a
needle to poke the reset hole and restore the remote to its default settings. Once
your camera is successfully paired with the remote, you can remotely control your
camera to take photos, record videos and more using the remote. Below you will find
a list of operating instructions for using the remote control 1.
Button Operation Instructions for Remote Control 1
Blue Indicator
Red Indicator
Power Button
Note: The remote is splashproof only, but not waterproof.
1. Power on or off / Pair
Function
Power on
USB Port
Operation
Operation
Status
Off Press the
Power button
Screen
Shutter Button
Mode Button
Detail
Press the Power button to turn on
the remote control. The red and
blue indicators on the remote will
be flashing quickly.
22 21