Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2: DOUBLE HANDLE ASSEMBLY
1.
Put the connecting tube (nº44) onto the channel of the control valve (nº46), lock with hinge pin Ø5x26 (nº42),
cotter pin Ø2x10 (nº43), then fixed with pliers.
2.
Attach frame (nº37) to the control valve (#46) using lock washer Ø8 (nº22) and inner hex screw M8x16 (nº34).
3.
Attach spacer plate (nº35) to the frame (nº37) using lock washer Ø8 (nº22) and inner hex screw M8x16 (nº34).
STEP 3: WHEEL ASSEMBLY
1.
Attach the wheels (nº74) to the wheel stand (nº73) using flat washer Ø16 (nº77) ,thin hex slotted nut M16
(nº76) and cotter pin Ø4x30(nº75).
34
22
35
42
37
44
46
43
73
74
77
76
75
61
EN
Publicidad
