Publicidad
Idiomas disponibles
Idiomas disponibles
62
STEP 4: ATTACH BEAM TO THE WHEEL STAND
1.
Attach the beam (nº1) to the wheel stand (nº73) secure using hex bolt M10x55 (nº27), flat washer Ø10
(nº15), lock washer Ø10 (nº16) and nylon lock nut M10 (nº17).
STEP 5: ATTACH FRONT SUPPORT LEG AND HANDLE BAR TO THE BEAM
1.
Attach the front support leg (nº12) to the beam (nº1) secure using hex bolt M10x90 (nº14), flat washer Ø10
(nº15), lock washer Ø10 (nº16) and nylon lock nut M10 (nº17). Then fix the lock pin (nº13).
2.
Attach the handle bar (nº81) to the beam (nº1) using flat washer Ø16 (nº77) and cotter pin Ø4x30 (nº75).
1
27/15/16/17
81
75
1
77
14/15/16/17
12
13
73
Publicidad
