Publicidad
Idiomas disponibles
Idiomas disponibles
The main menu is then displayed:
<LANGUAGE><CONFIG>
<ID><TEST><ESC>
a) Using the arrow keys, move the cursor to
<LANGUAGE> and press the "bell" key to
access the screen form used to select operating
language. The first screen form is as follows:
<ITA> <FRA> <ENG>
<DEU> <ESP> <
Move the cursor to language selected and press
the 'Call' key.
b) To program the installation site description
move the cursor to <ID> and press the 'Call' key
The following is displayed:
<Esc><Del><End>A
Use the ↑. and. ↓ keys to scroll the characters
that can be entered.
Press the 'Call' key to enter the character
selected in the upper line of the display.
Although up to 30 characters can be entered
(starting from the time the 16th character is
entered, the top line scrolls progressively to
the left), it is advisable to restrict insertion to 15
because only 15 will be displayed in the search
from.Terminal.
Once entry has been completed, position the
cursor in the reduced <Esc><Del><End> menu.
To do this, hold down the ↓ key until the cursor
is positioned on the 'E' of <Esc>. To confirm
insertion of the name, select the <End> item
using the ↑ key and press the Call key.
c) Moving the cursor to <CONFIG> and pressing the
'Call' key, programming of the 11 configuration
parameters distributed in subsequent screen
pages is accessed.
MODE TYPE:
<MAIN> <SECOND>
MODULE:CODE JJJ
BUSY TIME:10s
<10><20><30><40>
8
>
JJJ
LOCK RELEASE TYPES:
<FREE> <SEC>
DOOR OPEN T. 0s
<-> <+> <OK>
CALL T.:3s
<1><2><3><4><5>
VOICE LINES:1
BUZZER MED.LEV
<MIN><MED><MAX>
KEY O 1:0000
KEY 2:0000
PASSWORD: 9998
In all the screen pages, the programming method
is identical:
− using the arrows, move the cursor to the option
selected and then press the 'Call' key to confirm
and move to the next screen page.
− In screen pages in which a code must be inserted,
use the numeric keys. To correct any errors and
restore the all data saved press the 'X' key.
Once programming has been completed the main
menu is redisplayed:
<LANGUAGE><CONFIG>
<ID><TEST><ESC>
To restore normal functioning, select <ESC> and
confirm with the 'Call' key
NOTE:.to. interrupt. programming. at. any. time. and.
return directly to normal functioning simply
press the 'X' key for more than 3 seconds..In.
this case the data entered so far will remain
however valid.
<1> <2>
0000
0000
9998
DS1038-030
Publicidad
