Publicidad
Idiomas disponibles
Idiomas disponibles
the same time. The display will show:
− Answering 'YES', all the Names and all the
Lock Release Codes stored in the device will be
deleted. Answering 'No', another two prompts will
be displayed for confirmation of ONLY the Names
Erase names?
Erase lock rel?
<S> <N>Y
or ONLY the Lock Release Codes:
Answering 'YES' to the first prompt, ONLY the
Names will be deleted.
INSTALLATION
WARNING: for wiring and the maximum
permissible distances, follow the instructions
given in the 'Integrated Systems Technical
Manual'
The Call Module must be installed on Sinthesi S2
frame (not provided).
The anti-theft screw provided must be used instead
of the normal screw furnished with the Sinthesi S2
frame in order to guarantee installation security.
SOUND LEVEL ADJUSTMENT
The sound level towards the indoor set called is
factory set and does not require adjustment.
The sound level towards the outside is factory set to
a medium value. To modify this, use a screwdriver
on adjustment (3).
DISPLAY CONTRAST ADJUSTMENT
Display contrast is factory set to an optimal level. It
can however be modified using a screwdriver on the
related adjustment (11).
34
<Y> <N>
ERROR CODES
Various types of error codes are put on the display.
ERRORS DURING NORMAL OPERATION
Call to a non-existent user:
NON EXISTENT
Call from a secondary call module to a user of
another riser:
At least one key is jammed:
KEYBOARD
Door lock release code incorrect or disabled:
LOCK REL.
NON-EXIST
ERRORS DURING INSTALLATION/PROGRAMMING
No signal on data line (terminal 'D' not connected or
signal missing):
DATA LINE
Insertion of an incorrect Password:
PASSWORD
INCORRECT
Attempt to insert a name already present in the
memory:
NAME PRESENT
Attempt to insert a name with the memory full:
MEMORY FULL
ERROR
RISER
ERROR
JAMMED
ERROR
ERROR
ERROR
DS1038-030
Publicidad
