Publicidad
Idiomas disponibles
Idiomas disponibles
5. Fuel specifications
• The sprayer has an air-cooled 2-stroke engine that uses a mixture of unleaded gasoline and high
quality auto-mixing oil with fuel stabilizer specified for air-cooled 2-cycle engines.
• Do not use any type of gasoline premixed with oil purchased at gas stations, such as gasoline
intended for motorcycles.
• Do not use automotive grade oil or 2-stroke outboard motor oil.
• To prepare the mixture correctly, put some gasoline in a clean container approved for gasoline,
pour all the oil into it and shake it well, then pour the rest of the gasoline and stir the mixture again
for at least 1 minute. Be careful, if the agitation is insufficient, there is an increased danger of
clogging.
• Do not use fuel mixture stored for more than 7 days. Mix in small amounts.
WARNINGS!
• Gasoline is highly flammable. Avoid smoking or producing any flame or spark near
the fuel, nor the area where the gasoline is supplied, nor where the
mixed with the oil is made, nor when operating the sprayer.
• Any attempt to start the sprayer without adding oil to the fuel mixture will result in
engine failure
Incorrect mixture can cause the equipment's engine to break down!
PL2500N-S y
PL2500L-S
The mixture ratio for the PL2500N-S and
PL2500L-S models must be 25 times
gasoline to 1 oil.
RATIO
25:1
MIX
PL2500L-C
The mixture ratio for PL2500L-C model
must be 30 times gasoline to 1 oil.
RATIO
30:1
MIX
17
Publicidad
