AKASO V50 Elite Manual De Instrucciones página 13

EN
Customizing Your V50 Elite
Video Settings
1. Video Resolution
4K 60fps, 4K 30fps, 2.7K 60fps, 2.7K 30fps, 1080P 120fps, 1080P 60fps, 1080P 30fps,
720P 240fps, 720P 120fps, 720P 60fps (Default setting is 4K 60fps)
Note: When capturing videos at high resolutions or high frame rates in warm ambient
temperatures, the camera may become warm and use more power.
2. Image Stabilization
On/Off (Default setting is Off)
This setting adjusts the footage to offset for motion during capture. The result is
smoother footage, especially in activities with relatively small but fast motion including
cycling, motorcycling, and handheld uses.
Note:
1. Image Stabilization is disabled when you set the video resolution to 4K 60fps,
2.7K 60fps , 1080P 120fps or 720P 240fps.
2. For more features that do not work with Image Stabilization, please refer to the
form on page 18.
3. Loop Recording
Unlimited/2 Min/3 Min/5 Min (Default setting is Unlimited)
Using Loop Recording, you can continuously record video, but save only the moments
that you want. For example, if you select a 5-minute interval, only the previous 5
minutes are saved when you press the Shutter button to stop recording. If you record
for 5 minutes and do not press the Shutter button to stop recording and save, the
camera records a new 5-minute interval by recording over your previous 5 minutes
of footage. When the memory card is full, the new files will cover the old one if loop
recording is on.
Note: Loop Recording is disabled when Timelapse Video, Slow Motion Movie and
Fast Motion Movie are enabled.
11