AKASO V50 Elite Manual De Instrucciones página 19

EN
When Auto Power Off is enabled, your V50 Elite will be powered off automatically
after a period of inactivity to save battery life.
9. Power-on Auto Record
On/Off (Default setting is Off)
If you turn on Power-on Auto Record, the camera records video automatically after
you turn on V50 Elite.
10. Power Frequency
50Hz/60Hz (Default setting is 50Hz)
11. White Balance
Auto/Daylight/Cloudy/Tungsten Light/White Fluorescent (Default setting is Auto)
White Balance lets you adjust the color temperature of videos and photos to optimize
for cool or warm lighting conditions. When you change this setting, the LCD display
immediately shows you the effect on your image.
Note: White Balance will be disabled when Special Effect is turned on.
12. Exposure
-2.0/-1.0/+0.0/+1.0/+2.0 (Default setting is +0.0)
By default, your camera uses the entire image to determine the appropriate exposure
level. However, Exposure lets you select an area that you want the camera to prioritize
when determining exposure. This setting is particularly useful in shots where an
important region might otherwise be over-or underexposed.
When you change this setting, the LCD display immediately shows you the effect
on your image. If you change modes, the camera returns to using the entire scene
to determine the correct level of exposure.
13. Language
English, 日本語 , Deutsch, Italiano, Español, Français, 简体中文 , 繁體中文 (Default
setting is English)
You can choose the system language for your V50 Elite.
14. Format Card
Yes/No (Default setting is No)
17