KTM A46014986033 Instrucciones De Montaje página 36

6 CONNECTIVITY UNIT OFFROAD
6.1
Connectivity Unit Offroad
GPS unit
The app provided by the manufacturer guides you through the operation of the Connectivity Unit Offroad.
Possible states
•
Button
•
Button
•
Button
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
tooth
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
•
Indicator lamp
14
Connectivity Unit Offroad (CUO)
1
is attached on the right fork leg.
2
is mounted on the fender.
3 is pressed briefly (<1.5 s) – A recording is started or stopped.
is pressed and held (<1.5 s) – The pairing process is started.
3
is pressed and held (<7 s) – The Connectivity Unit Offroad is reset to factory settings.
3
A does not light up – The Connectivity Unit Offroad is switched off.
A lights up blue – The Connectivity Unit is ready for operation.
flashes blue – A recording is downloaded.
A
A flashes green – A recording is active.
A flashes yellow – A recording was started before the position was captured via GPS.
does not light up – The Bluetooth
B
lights up blue – Bluetooth
B
B flashes blue – Bluetooth
lights up green – The Connectivity Unit Offroad is connected to an end device via Blue-
B
® .
C does not light up – The WiFi module is switched off.
C lights up blue – The WiFi module is active but not connected.
lights up green – The WiFi module is active and connected.
C
does not light up – The GPS module is switched off.
D
D lights up blue – The GPS module is active but the position is not detected.
lights up green – The GPS module is active and the position is detected.
D
® module is switched off.
®
is active and no end device is stored.
® is active and an end device has been set up but not connected.
M02091-10