Publicidad
Idiomas disponibles
Idiomas disponibles
Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in
the packaging.
11.Follow your local regulations relating to disposal of battery.
12.Use the batteries only with the products specified by Elite . Installing the batteries to non-compliant
products may result in a fire, excessive heat, explosion, or leak of electrolyte.
Save these instructions
CAUTION: Only use genuine Elite batteries. Use of non-genuine Elite batteries, or batteries that have been
altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Elite
warranty for the Elite tool and charger.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life.
3. Charge the battery cartridge with room temperature at 5 °C - 45 °C . Let a hot battery cartridge cool down
before charging it.
4. Charge the battery cartridge if you do not use it for a long period (more than six months).
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and the battery cartridge is removed before adjusting
or checking function on the tool
Installing or removing battery cartridge
CAUTION:
Always switch off the tool before installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure
to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage
to the tool and battery cartridge and a personal injury.
1
1. Button
2. Battery cartridge
CAUTION:
Always install the battery cartridge fully. If not, it may accidentally fall out of the tool, causing injury
to you or someone around you.
To remove the battery cartridge,
slide it from the tool while sliding
the button on the front of the
cartridge.
To install the battery cartridge, align
the tongue on the battery cartridge
with the groove in the housing and
slip it into place. Insert it all the
way until it locks in place with a
little click.
2
8
Keep Working
Publicidad
