Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being
inserted correctly.
Indicating the remaining battery capacity
1. Indicator lamps
2. Check button
NOTE:
Depending on the conditions of use and the ambient temperature, the indication may differ slightly
from the actual capacity.
Tool / battery protection system
The tool is equipped with a tool/battery protection system. This system automatically cuts off power to the
motor to extend tool and battery life. The tool will automatically stop during operation if the tool or battery is
placed under one of the following conditions:
Overload protection
When the battery is operated in a manner that causes it to draw an abnormally high current, the tool
automatically stops without any indication. In this situation, turn the tool off and stop the application that
caused the tool to become overloaded. Then turn the tool on to restart.
1
2
Indicator lamps
Off
Lighted
Press the check button on the
battery cartridge to indicate the
remaining battery capacity. The
indicator lamps light off
immediately when release the
check button.
Remaining
capacity
75% to100%
25% to50%
10% to25%
9
Keep Working
Publicidad
