Publicidad
Idiomas disponibles
Idiomas disponibles
Reversing switch action
1. Reversing
switch lever
A
This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from
the A side for clockwise rotation or from the B side for counterclockwise rotation.
When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled.
CAUTION:
Always check the direction of rotation before operation.
CAUTION:
Use the reversing switch only after the tool comes to a complete stop. Changing the direction of
rotation before the tool stops may damage the tool.
CAUTION:
When not operating the tool, always set the reversing switch lever to the neutral position.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the battery cartridge is removed before carrying
out any work on the tool.
Selecting correct impact socket
Always use the correct size impact socket for bolts and nuts. An incorrect size impact socket will result in
inaccurate and inconsistent fastening torque and/or damage to the bolt or nut
Installing or removing impact socket
1. Impact socket
2. Square drive
1
2
B
11
Keep Working
Publicidad
