Publicidad
Idiomas disponibles
Idiomas disponibles
To install the impact socket, push it onto the square drive of the tool until it locks into place.
To remove the impact socket, simply pull it off.
Installing hook
CAUTION:
When installing the hook, always secure it with the screw firmly. If not, the hook may come off
from the tool and result in the personal injury.
2
3
1. Groove
2. Hook
3. Screw
OPERATION
CAUTION:
Always insert the battery cartridge all the way until it locks in place. If not, it may accidentally fall
out of the tool, causing injury to you or someone around you.
1
The hook is convenient for temporarily
hanging the tool. This can be installed
on both side of the tool. To install the
hook, insert it into a groove in the tool
housing on either side and then secure
it with a screw. To remove, loosen the
screw and then take it out.
Hold the tool firmly and place the impact socket
over the bolt or nut. Turn the tool on and fasten
for the proper fastening time.
The
proper
fastening
depending upon the kind or size of the bolt, the
material of the workpiece to be fastened, etc.
The relation between fastening
fastening time is shown in the figures.
torque
may
differ
torque and
12
Keep Working
Publicidad
