MSW Motor Technics MSW-GP-100 Manual De Instrucciones página 35

3.3.3 Turning the engine off
• Set the throttle lever to the lowest engine speed (pictogram of a turtle).
• Turn the ignition switch to the "OFF" position - the engine will stop.
• In case of further non-use, close the fuel valve by moving its lever to the
opposite
IMPORTANT: in case of emergency shutdown of the pump: just turn the
ignition switch to the "OFF" position - the engine will stop immediatelly.
Close the fuel valve.
3.3.4 TRANSPORT AND STORAGE
If the equipment is not to be used again, cool it down completely before
transporting.
• Flush the pump with clean water, then drain any remaining water by
unscrewing the water drain plug (N).
• Close the fuel valve (I). For transport, it is advisable to empty the fuel
tank
Transport the unit in a horizontal position – same as set during
operation.
If the unit is not used for an extended period of time:
• Cool the unit.
Flush the pump with clean water and pour off any remaining
•
water by unscrewing the water drain plug (N).
• Turn off fuel valve (to "OFF" position).
• Empty any residual fuel from the fuel drop tank in the carburetor by
unscrewing the bolt on the bottom of the carburetor (see image
position
to prevent
EN
to
any fuel leakage
the arrow.
during transport.