MSW Motor Technics MSW-GP-100 Manual De Instrucciones página 36

below).
• Open the fuel valve and pour the remaining fuel out of the tank.
• Screw the bolt on the bottom of the carburetor drop tank back in.
• Replace the engine oil with fresh one.
• Remove the spark plug (located under the ignition wire boot - see
image below) and pour a little fresh engine oil through its hole in the
engine.
• Then grasp the recoil starter handle to turn the engine piston several
times to distribute the oil in the cylinder. Reinstall the spark plug in
the engine and put on the wire boot.
• Cover the pump to protect it from dust and sunlight.
EN