Publicidad
Idiomas disponibles
Idiomas disponibles
FAULT
The system does not move
The system does not stop at
the correct position
The system stops after
several consecutive
movements
The curtain shifts laterally
during movement
6
T
ROUBLESHOOTING
POSSIBLE CAUSE
Incorrect wiring
No electrical power
Faulty motor unit
Limit stops incorrectly set
Limit stops incorrectly set
Side guides not parallels
Motor has reached max.
temperature limit
Box supports incorrectly
attached
En 3
Z 388 rB
REMEDY
Check and correct the wiring by following
the instructions in this manual
Restore electrical power
Request replacement of the motor unit
Set the limit stops
Set the limit stops
Reposition the guides so that the distance
from each other is the same at the
bottom and at the top
Let the motor cool off for a few minutes
and then try to operate the blind again
Reposition the supports so that the box is
perfectly horizontal
Publicidad
