Publicidad
Idiomas disponibles
Idiomas disponibles
f)
Do not overestimate your capabilities. Maintain body balance and equilibrium
at all times during operation. This allows for better control of the machine in
unexpected situations.
g)
Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away
from moving parts. Loose clothing, jewelry, or long hair can be caught in
moving parts.
h)
The product is not a toy. Children should be watched to ensure that they do
not play with the appliance. Do not overestimate your capabilities. Maintain
body balance and equilibrium at all times during operation. This allows for
better control of the machine in unexpected situations.
Safe use of the device
2.4.
a)
Do not overload the device. Use tools that are suitable for the application. A
correctly selected product will do a better and safer job for which it was
designed.
b)
Do not use the device if the ON/OFF switch does not function properly (does
not turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
c)
Keep unused products out of the reach of children and anyone unfamiliar with
the device or this manual. Products are dangerous when used by
inexperienced users.
d)
Keep the product in good working order. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
return the device for repair before use.
e)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
f)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
g)
When transporting or moving the device from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the device is used.
h)
Avoid situations in which the device stops under heavy loads during operation.
This can cause overheating of the drive elements and consequent damage to
the equipment.
i)
Do not move, shift, or rotate the device while in operation.
j)
Do not leave the device switched on unattended.
k)
Clean the device regularly to prevent permanent dirt build-up. Avoid situations
in which the device stops under heavy loads during operation. This can cause
overheating of the drive elements and consequent damage to the equipment.
EN
Publicidad
