Publicidad
Idiomas disponibles
Idiomas disponibles
Before carrying out any maintenance or cleaning tasks,
unplug the power cord, empty the compressed air tank and
allow the compressor to cool down to avoid accidental
activation and burns.
In the event of an overload or malfunction, the fuse (12)
trips and interrupts the electrical circuit to protect the
compressor.
After eliminating the cause of the fuse tripping, replace it
by following these steps:
1. Unscrew the fuse cap/holder (8);
2. Remove the fuse and replace it with a new one;
3. Fit and tighten the cap/holder.
Never fit a fuse with a rated current higher than that
specified in the technical specifications.
Cleaning
After each use clean all compressor components. Wipe the
power tool with a clean, damp cloth or blow it with low
pressure compressed air. Careful handling protects the
power tool and extends its service life.
Keep the compressor and its ventilation slots clean. Clean
ventilation slots regularly or whenever they become
clogged.
Storage
When not in use, the compressor should be stored in a dry,
enclosed space, free from corrosive vapours and out of
children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information about the disposal of the used
compressor from the legal responsible for recycling in your
town.
WhatsApp:
+351 967 817 569
E-mail:
support@vito-tools.com
Publicidad
