Publicidad
Idiomas disponibles
Idiomas disponibles
Question/Problem - Cause
Cause
Compressor does not start:
• No supply voltage;
• The supply voltage is too low;
• The ON/OFF switch is set to the "0" position;
• The fuse is damaged due to overload;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by its use.
Solution
• Check the plug, socket and circuit breaker of the power
supply circuit;
• Avoid too long extension cords;
Use an extension cord with enough transversal cross-
section;
• Set the ON/OFF switch to the "I" position;
• Replace the fuse;
We declare, under our sole responsibility, that the product
labelled MINI PORTABLE COMPRESSOR 230V - 140W with
code VICO230V complies with the following standards or
normative documents: EN 12100:2010, EN 1012-1:2010, EN
60204-1:2018, as defined by:
2006/42/EC - The Machinery Directive
S. João de Ver,
23rd November 2023
Central Lobão S. A.
Technical manager
Hugo Santos
Publicidad
