Risoluzione Dei Problemi - FTE Maximal MAX COMBO NET Manual De Usuario

TROUBLESHOOTING
Problem
Nothing appears on the Front
Panel or No power supply
No Picture
No Sound
Remote Control Unit dose not
work
Service is not running or
scrambled
"No Signal" on the screen
Tuner Defective Check
You have forgotten your
secret PIN Code
MAX_COMBO_NET_manual_print REV2.0.pdf 179 MAX_COMBO_NET_manual_print REV2.0.pdf 179
Solution
Check that the power cable is plugged into the power sock-
et.
Check the dish and adjust it.
Check the cable connection and correct it.
Check channel and video output.
Check the volume level of the TV and receiver.
Check the mute status of TV and receiver.
Check the cable connection and correct.
Replace batteries.
Aim the remote control unit directly to the receiver.
Checking that nothing blocks the front panel.
Check the Conditional Access Module and smart card are
appropriate for the selected service.
Check the Conditional Access Module and smart card are
correctly inserted or not.
Check the signal strength and the signal quality in the
menu.
Check the LNB and replace the LNB if necessary.
Check the LNB cable.
Check the Dish and adjust it.
Go to the Option and select System Information.
Contact your Service Provider.
175
31/01/2013 12:52:27 31/01/2013 12:52:27