Installation; Satellite Search - FTE Maximal MAX COMBO NET Manual De Usuario

MENU GUIDE
II. INSTALLATION
This section may help you to set up antenna and
scan satellite or transponder, etc. Select Installations
in Main Page using
Press EXIT to return to the previous menu or press
MENU to go to the current live channel.
II-1. Satellite Search
II-2. DiSEqC Switch
II-3. Motor Setup
II-4. Terrestrial Search
II-5. Home Streaming
II-6. Factory Default
II-1 Satellite Search
1.You can move the cursor using
when you select the value that you want.
a) Satellite
- Press OK to display the Satellite List Box.
- Select the proper Satellite and then press OK.
b) DiSEqC
- Press OK to display the DiSEqC Port List.
- Select the proper DiSEqC port and then press OK.
c) LNB
- Press OK to display the LNB Frequency List.
- Select the proper LNB Frequency and then
press OK.
- You can also input directly the numbers using
NUMBER KEY on the RCU.
d) 22KHz Tone
- Select the one among None, 0 KHz or 22 KHz
depending on the user's antenna switch box.
e) Search Option
- Press OK to display the Search Option list.
- Select the Search Option that you want and then
press OK.
MAX_COMBO_NET_manual_print REV2.0.pdf 19 MAX_COMBO_NET_manual_print REV2.0.pdf 19
and press OK.
and press OK
TP EDIT : To Edit TP, Press the RED
button on the RCU.
f) Search
- Press Search to start scan channels.
- SAT Rename : To rename SAT, Press the
Green button on the RCU.
15
31/01/2013 12:51:40 31/01/2013 12:51:40